At+Qindcfg Urc Indication Configuration - Quectel EC25 Command Manual

Reference
Parameter
<enable> 0 Disable ring tone
1 Enable Nokia ring tone
2 Enable ring tone
NOTE
The settings of the command will take effect immediately, and will be saved after power off.
Example
AT+QCFG="tone/incoming"
+QCFG: "tone/incoming",0
OK
AT+QCFG="tone/incoming",1
OK
AT+QCFG="tone/incoming"
+QCFG: "tone/incoming",1
OK

4.4. AT+QINDCFG URC Indication Configuration

The command is used to control URC indication.
AT+QINDCFG URC Indication Configuration
Test command
AT+QINDCFG=?
EC25&EC21_AT_Commands_Manual
If there is any error related to ME functionality:
+CME ERROR: <err>
//Ring tone function is disabled
//Enable ring tone
Response
+QINDCFG: "all",(0,1),(0,1)
+QINDCFG: "csq",(0,1),(0,1)
+QINDCFG: "smsfull",(0,1),(0,1)
+QINDCFG: "ring",(0,1),(0,1)
+QINDCFG: "smsincoming",(0,1),(0,1)
+QINDCFG: "act",(0,1),(0,1)
LTE Module Series
EC25&EC21 AT Commands Manual
57 / 231