Quectel EC25 Command Manual page 161

<Traffic class>
<Maximum bitrate UL>
<Maximum bitrate DL>
<Guaranteed bitrate UL>
<Guaranteed bitrate DL>
<Delivery order>
<Maximum SDU size>
EC25&EC21_AT_Commands_Manual
Integer type. Indicates the type of application for which the UMTS
bearer service is optimized (refer to 3GPP TS 24.008 subclause
10.5.6.5). If the parameter is specified as conversational or streaming,
then the Guaranteed and Maximum bitrate parameters should also be
provided.
0 Conversational
1 Streaming
2 Interactive
3 Background
4 Subscribed value
Integer type. Indicates the maximum number of kbits/s delivered to
UMTS (up-link traffic) at a SAP. As an example a bitrate of 32kbit/s
would be specified as „32‟ (e.g. AT+CGEQREQ=...,32, ...).
0 Subscribed value
1~5760
Integer type. Indicates the maximum number of kbits/s delivered by
UMTS (down-link traffic) at a SAP. As an example a bitrate of 32kbit/s
would be specified as „32‟ (e.g. AT+CGEQREQ=...,32, ...).
0 Subscribed value
1~42200
Integer type. Indicates the guaranteed number of kbits/s delivered to
UMTS (up-link traffic) at a SAP (provided that there is data to deliver).
As an example a bitrate of 32kbit/s would be specified as „32‟ (e.g.
AT+CGEQREQ=...,32, ...).
0 Subscribed value
1~5760
Integer type. Indicates the guaranteed number of kbits/s delivered by
UMTS (down-link traffic) at a SAP (provided that there is data to
deliver). As an example a bitrate of 32kbit/s would be specified as „32‟
(e.g. AT+CGEQREQ=...,32, ...).
0 Subscribed value
1~42200
Integer type. Indicates whether the UMTS bearer shall provide
in-sequence SDU delivery or not (refer to 3GPP TS 24.008 subclause
10.5.6.5).
0 No
1 Yes
2 Subscribed value
Integer type. (1,2,3,...) indicates the maximum allowed SDU size in
octets. If the parameter is set to „0‟ the subscribed value will be
requested (refer to 3GPP TS 24.008 subclause 10.5.6.5).
0 Subscribed value
10...1520 (value needs to be divisible by 10 without remainder)
1502
LTE Module Series
EC25&EC21 AT Commands Manual
160 / 231