At+Cmgf Message Format - Quectel EC25 Command Manual

<mt> Mobile terminated messages
0
1
<mo> Mobile originated messages
0
1
<bm> Broadcast type messages
0
1
Example
AT+CSMS=?
+CSMS: (0,1)
OK
AT+CSMS=1
+CSMS: 1,1,1
OK
AT+CSMS?
+CSMS: 1,1,1,1
OK

9.2. AT+CMGF Message Format

The command specifies the input and output format of the short messages. <mode> indicates the format
of messages used with Test, Read, Write and Execution Commands and unsolicited result codes resulting
from received messages.
The format of messages can be either PDU mode (entire TP data units used) or text mode (headers and
body of the messages given as separate parameters). Text mode uses the value of parameter <chset>
specified by AT+CSCS command to inform the character set to be used in the message body in the
TA-TE interface.
AT+CMGF Message Format
Test Command
AT+CMGF=?
EC25&EC21_AT_Commands_Manual
<service> setting 1 is mentioned under corresponding command
descriptions).
Type not supported
Type supported
Type not supported
Type supported
Type not supported
Type supported
Response
+CMGF: (list of supported <mode>s)
EC25&EC21 AT Commands Manual
//Test command
//Set type of message service as 1
//Read command
LTE Module Series
117 / 231