Quectel EC25 Command Manual page 108

num1>[,<eccnum2>,...[,<eccnumN>]]
]
Read Command
AT+QECCNUM?
Maximum Response Time
Parameter
<mode>
<type>
<eccnum>
Example
AT+QECCNUM=?
+QECCNUM: (0-2)
OK
AT+QECCNUM?
+QECCNUM: 0,"911","112","00","08","110","999","118","119"
+QECCNUM: 1,"911","112"
OK
AT+QECCNUM=0,1
+QECCNUM: 1,"911","112"
EC25&EC21_AT_Commands_Manual
cases, <eccnumN> should be omitted, and the response is:
+QECCNUM: <type>,<eccnum1>,<eccnum2>[...]
OK
If <mode> is not equal to 0: <mode>=1 is used to add the
ECC number; <mode>=2 is used to delete the ECC number.
In this case, at least one ECC number <eccnumN> should be
inputted, and the response is:
OK
ERROR
Response
+QECCNUM: 0,<eccnum1>,<eccnum2>[...]
+QECCNUM: 1,<eccnum1>,<eccnum2>[...]
OK
300ms
ECC number operation mode
0 Query ECC numbers
1 Add ECC numbers
2 Delete ECC numbers
ECC number type
0 ECC numbers without (U)SIM
1 ECC numbers with (U)SIM
String type. ECC numbers ( e.g. 110, 119)
//Query the supported ECC number operation mode
//Query the ECC numbers with or without (U)SIM
//Query the ECC numbers with (U)SIM
LTE Module Series
EC25&EC21 AT Commands Manual
107 / 231