At+Qcfg="Nwscanmode" Network Search Mode Configuration - Quectel EC25 Command Manual

Maximum Response Time
Parameter
<attachmode>

4.3.2. AT+QCFG="nwscanmode" Network Search Mode Configuration

The command specifies the network mode to be serached. If <effect> is omitted, the configuration will
take effect immediately.
AT+QCFG="nwscanmode" Network Search Mode Configuration
Write Command
AT+QCFG="nwscanmode"[,<scanmod
e>[,<effect>]]
Maximum Response Time
Parameter
<scanmode>
EC25&EC21_AT_Commands_Manual
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
Number format, the mode to attach GRPS when UE is powered on
0 Manual attach
1 Auto attach
Response
If <scanmode> and <effect> are both omitted, return the
current configuration:
+QCFG: "nwscanmode",<scanmode>
OK
If <scanmode> and <effect> are not omitted, set the
network mode to be searched:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
Number format, network search mode
0 AUTO
1 GSM only
2 WCDMA only
3 LTE only
LTE Module Series
EC25&EC21 AT Commands Manual
41 / 231