At+Clip Calling Line Identification Presentation - Quectel EC25 Command Manual

OK

11.4. AT+CLIP Calling Line Identification Presentation

The command refers to the GSM/UMTS supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling party when
receiving a mobile terminated call.
AT+CLIP Calling Line Identification Presentation
Test Command
AT+CLIP=?
Read Command
AT+CLIP?
Write Command
AT+CLIP=<n>
Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<n> 0
1
<m> 0
1
2
<number> Phone number in string type of calling address in format specified by <type>
<subaddr> String type subaddress of format specified by <satype>
<satype> Type of subaddress octet in integer format (refer to 3GPP TS 24.008 [8] subclause
10.5.4.8)
EC25&EC21_AT_Commands_Manual
Response
+CLIP: (list of supported <n>s)
OK
Response
+CLIP: <n>,<m>
OK
Response
TA enables or disables the presentation of the calling line
identity (CLI) at the TE. It has no effect on the execution of the
supplementary service CLIP in the network.
OK
If there is any error related to ME functionality:
+CME ERROR: <err>
15s, determined by network.
Suppress unsolicited result codes
Display unsolicited result codes
CLIP not provisioned
CLIP provisioned
Unknown
LTE Module Series
EC25&EC21 AT Commands Manual
181 / 231