Status Control Commands; At+Cpas Mobile Equipment Activity Status - Quectel EC25 Command Manual

4

Status Control Commands

4.1. AT+CPAS Mobile Equipment Activity Status

The Execution Command queries the module‟s activity status.
AT+CPAS Mobile Equipment Activity Status
Test Command
AT+CPAS=?
Execution Command
AT+CPAS
Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<pas> 0
3
4
Example
AT+CPAS
+CPAS: 0
OK
EC25&EC21_AT_Commands_Manual
Response
+CPAS: (list of supported <pas>s)
OK
Response
TA returns the activity status of ME:
+CPAS: <pas>
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
Ready
Ringing
Call in progress or call hold
EC25&EC21 AT Commands Manual
//The module is idle
LTE Module Series
37 / 231