7.14. AT+CSTA Select Type of Address
The Write Command selects the type of number for further dialing commands ATD according to 3GPP
Specifications. Test command returns values supported a compound value.
AT+CSTA Select Type of Address
Test Command
AT+CSTA=?
Read Command
AT+CSTA?
Write Command
AT+CSTA=<type>
Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<type>
Current address type setting.
129
145
7.15. AT+CLCC List Current Calls of ME
The execution command returns the list of all current calls. If the command is executed successfully, but
no calls existed, no information response but OK is sent to TE.
AT+CLCC List Current Calls of ME
Test Command
AT+CLCC=?
Execution Command
AT+CLCC
EC25&EC21_AT_Commands_Manual
Response
+CSTA: (list of supported <type>s)
OK
Response
+CSTA: <type>
OK
Response
OK
300ms
Unknown type
International type (contains the character "+")
Response
OK
Response
TA returns a list of current calls of ME. If the command is
executed successfully, but no calls are existed, then no
information but OK response is sent to TE.
[+CLCC :
LTE Module Series
EC25&EC21 AT Commands Manual
101 / 231