At+Cgdcont Define Pdp Context - Quectel EC25 Command Manual

Example
AT+CGATT=1
OK
AT+CGATT=0
OK
AT+CGATT?
+CGATT: 0
OK

10.2. AT+CGDCONT Define PDP Context

The command specifies PDP context parameters for a specific context <cid>. A special form of the Write
Command (AT+CGDCONT=<cid>) causes the values for context <cid> to become undefined. It is not
allowed to change the definition of an already activated context.
The Read Command returns the current settings for each defined PDP context.
AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT=?
Read Command
AT+CGDCONT?
Write Command
AT+CGDCONT=<cid>[,<PDP_type>[,<
APN>[,<PDP_addr>[,<data_comp>[,<
head_comp>]]]]]
Maximum Response Time
Reference
3GPP TS 27.007
EC25&EC21_AT_Commands_Manual
//Attach to PS service
//Detach from PS service
//Query the current PS service state
Response
+CGDCONT: (range of supported <cid>s),<PDP_type>,
<APN>,<PDP_addr>,(list of supported <data_comp>s),(list
of supported <head_comp>s)
OK
Response
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<h
ead_comp>[...]
OK
Response
OK
ERROR
300ms
LTE Module Series
EC25&EC21 AT Commands Manual
147 / 231