Ats4 Set Response Formatting Character; Ats5 Set Command Line Editing Character - Quectel EC25 Command Manual

2.19. ATS4 Set Response Formatting Character

The command determines the character generated by the module for result code and information text,
along with the command line termination character set via ATS3.
ATS4 Set Response Formatting Character
Read Command
ATS4?
Write Command
ATS4=<n>
Maximum Response Time
Reference
V.25ter
Parameter
<n> 0-10-127

2.20. ATS5 Set Command Line Editing Character

The command determines the character value used by the module to delete the immediately preceding
character from the AT command line (i.e. equates to backspace key).
ATS5 Set Command Line Editing Character
Read Command
ATS5?
Write Command
ATS5=<n>
Maximum Response Time
EC25&EC21_AT_Commands_Manual
Response
<n>
OK
Response
This parameter setting determines the character generated
by the TA for result code and information text.
OK
300ms
Response formatting character (Default 10=<LF>)
Response
<n>
OK
Response
This parameter setting determines the character recognized
by TA as a request to delete the immediately preceding
character from the command line.
OK
300ms
LTE Module Series
EC25&EC21 AT Commands Manual
24 / 231