At+Cgclass Gprs Mobile Station Class - Quectel EC25 Command Manual

Parameter
<cid> A numeric parameter which specifies a particular PDP context definition (see
AT+CGDCONT command)
<PDP_addr> A string that identifies the MT in the address space applicable to the PDP. The address
may be static or dynamic. For a static address, it will be the one set by AT+CGDCONT
command when the context was defined. For a dynamic address it will be the one
assigned during the last PDP context activation that used the context definition referred
to by <cid>. <PDP_address> is omitted if none is available.
Example
AT+CGDCONT=1,"IP","UNINET"
OK
AT+CGACT=1,1
OK
AT+CGPADDR=1
+CGPADDR: 1,"10.76.51.180"
OK

10.10. AT+CGCLASS GPRS Mobile Station Class

The command is used to set the MT to operate according to the specified mode of operation. See 3GPP
TS 23.060.
AT+CGCLASS GPRS Mobile Station Class
Test Command
AT+CGCLASS=?
Read Command
AT+CGCLASS?
Write Command
AT+CGCLASS=<class>
EC25&EC21_AT_Commands_Manual
//Define PDP context
//Activated PDP
//Show PDP address
Response
+CGCLASS: (list of supported <class>s)
OK
Response
+CGCLASS: <class>
OK
Response
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
LTE Module Series
EC25&EC21 AT Commands Manual
165 / 231