Ats3 Set Command Line Termination Character - Quectel EC25 Command Manual
Lte module series, at commands
Hide thumbs
Also See for EC25:
- User manual (71 pages) ,
- Reference design (15 pages) ,
- Hardware design (43 pages)
Table of Contents
Advertisement
Example
ATI
Quectel
EC25
Revision: EC25EFAR02A09M4G
OK
A/
Quectel
EC25
Revision: EC25EFAR02A09M4G
OK
2.18. ATS3 Set Command Line Termination Character
The command determines the character recognized by the module to terminate an incoming command
line. It is also generated for result codes and information text, along with character value set via ATS4.
ATS3 Set Command Line Termination Character
Read Command
ATS3?
Write Command
ATS3=<n>
Maximum Response Time
Reference
V.25ter
Parameter
<n>
0-13-127
EC25&EC21_AT_Commands_Manual
//Repeat the previous command
Response
<n>
OK
Response
This parameter setting determines the character recognized
by TA to terminate an incoming command line. The TA also
returns this character in output.
OK
300ms
Command line termination character (Default 13=<CR>)
LTE Module Series
EC25&EC21 AT Commands Manual
23 / 231
Advertisement
Table of Contents
