NOTE
These parameters will not be saved.
12.11. AT+QRXGAIN Set Downlink Gains of RX
The command is used to set RX digital gains to change the downlink volume.
AT+QRXAGIN Set Downlink Gains of RX
Test Command
AT+QRXGAIN=?
Read Command
AT+QRXGAIN?
Write Command
AT+QRXGAIN=<rxgain>
Maximum Response Time
Parameter
<rxgain>
Numeric type. Indicates downlink digital gains. The range is 0-65535. The default value
might be different in different audio modes.
Example
AT+QRXGAIN=?
+QRXGAIN: (0-65535)
OK
AT+QRXGAIN?
+QRXGAIN: 20577
OK
EC25&EC21_AT_Commands_Manual
Response
+QRXGAIN: (0-65535)
OK
Response
+QRXGAIN: <rxgain>
OK
Response
OK
ERROR
300ms
//Test command.
//Query the current value. The default value might be different in
different audio modes.
LTE Module Series
EC25&EC21 AT Commands Manual
198 / 231