2
Description of AT Commands
2.1. Description of NIDD Related AT Commands
2.1.1. AT+QCFGEXT="pdp_type" Modify the Parameters of Specified PDP Context
AT+QCFGEXT="pdp_type" Modify the Parameters of Specified PDP Context
Write Command
Query the current configuration:
AT+QCFGEXT="pdp_type"
Write Command
Configure the parameters of a specified
PDP context:
AT+QCFGEXT="pdp_type",<cid>,<typ
e>[,<apn>[,<username>,<password>]
]
Parameter
<cid>
Integer type. PDP context identifier. A numeric parameter which specifies a particular
PDP context definition (see AT+CGDCONT command in Quectel_BG96_AT_
Commands_Manual for more details). It is currently only valid for <cid> is 1.
<type>
String type. Packet data protocol type.
"IP"
"PPP"
"IPV6"
"IPV4V6"
"Non-IP"
<apn>
String type. Access point name.
<username>
String type. User name of the selected APN.
<password>
String type. Password of the selected APN.
BG96_NIDD_AT_Commands_Manual
Response
+QCFGEXT: "pdp_type",<cid>,<type>,<apn>
OK
Response
OK
LTE Module Series
BG96 NIDD Commands Manual
6 / 13