At+Cgdcont Define Pdp Context - Quectel UG Series Command Manual

Example
AT+CGATT=1
OK
AT+CGATT=0
OK
AT+CGATT?
+CGATT: 0
OK
NOTE
The configuration will be saved to NV automatically.

10.2. AT+CGDCONT Define PDP Context

AT+CGDCONT specifies PDP context parameters for a specific context <cid>. A special form of the write
command (AT+CGDCONT=<cid>) causes the values for context <cid> to become undefined. It is not
allowed to change the definition of an already activated context.
The AT+CGDCONT read command returns the current settings for each defined PDP context.
AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT=?
Read Command
AT+CGDCONT?
Write Command
AT+CGDCONT=<cid>[,<PDP_type>[,<
APN>[,<PDP_addr>[,<data_comp>[,<
head_comp>]]]]]
WCDMA_UGxx_AT_Commands_Manual
WCDMA UGxx AT Commands Manual
//Attach to PS service
//Detach from PS service
//Query the current PS service state
Response
+CGDCONT: (range of supported <cid>s), <PDP_type>,
<APN>, <PDP_addr>, (list of supported <data_comp>s),
(list of supported <head_comp>s)
OK
Response
[+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<h
ead_comp>]
[...]
OK
Response
OK
ERROR
If error is related to ME functionality:
Confidential / Released
UMTS/HSPA Module Series
142 / 247