At+Cgdcont Define Pdp Context - Quectel M35 Command Manual

OK

10.2. AT+CGDCONT Define PDP Context

AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT=?
Read Command
AT+CGDCONT?
Write Command
AT+CGDCONT=<cid>[,<PDP_type>[,<
APN>[,<PDP_addr>[,<d_comp>[,<h_c
omp>]]]]]
Reference
GSM 07.07
Parameter
<cid> (PDP Context Identifier) a numeric parameter which specifies a particular PDP context
definition. The parameter is local to the TE-MT interface and is used in other PDP
context-related commands. The range of permitted values (minimum value=1) is returned
by the test form of the command
<PDP_type> (Packet Data Protocol type) a string parameter which specifies the type of packet data
protocol X25 ITU-T/CCITT X.25 layer 3 IP Internet Protocol (IETF STD 5) OSPIH Internet
Hosted Octet Stream Protocol PPP Point to Point Protocol (IETF STD 51)
<APN> (Access Point Name) a string parameter that is a logical name that is used to select the
GGSN or the external packet data network. If the value is null or omitted, then the
subscription value will be requested
<PDP_addr> A string parameter identifies the MT in the address space applicable to the PDP. If the value
M35_AT_Commands_Manual
Response
+CGDCONT: (range of supported <cid>s), <PDP_type>,
<APN>, <PDP_addr>, (list of supported <data_comp>s),
(list of supported <head_comp>s)
OK
Response
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<h
ead_comp>
<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<h
ead_comp>
...
OK
Response
OK
ERROR
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
112 / 186