Cycle Program Setting - Brother KE-430HX Service Manual

5-10. Cycle program setting

Sewing patterns that have been registered in user programs can be registered in up to 30 cycle programs (C001 to C030).
One cycle program can contain user programs up to a maximum of 50 steps.
When sewing the sewing patterns in a certain order, it can be useful to register them in a cycle program beforehand.
<Recording method>
1
Switch to the cycle program setting screen.
2
Select a cycle program number.
3
Select the program number to be registered in step 1.
4
Switch to the select program screen.
Touch the menu key to switch to the setting menu screen,
and touch "Cycle program setting" in the menu.
・ The display will switch to the select cycle program
Touch the
cycle program number.
(1)
・ If no cycle program has been registered, "---" will be
Select the program number for the program you would
like to edit, and touch the list.
・The cycle program edit screen will be displayed.
(2)
Select the step No.01 on the top of the list.
・ A check mark will appear in the check column of the
(3)
・ If you would like to delete the registration, you can do
Once a step has been selected and a check mark
appears, touch the step select key
・ The display will switch to the select user program
(4)
・ The user programs which have been registered will be
KE-430HX/KE-430HS, BE-438HX/BE-438HS
screen.
key (1) or the
displayed after the program number.
list which was touched.
it by touching a step to select it, and then touching the
clear key (3).
screen.
set in the selected step.
5. SETTING FUNCTION
key (2) to select the
(4).
60