Brother KE-430HX Service Manual page 84

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

5. SETTING FUNCTION
<When using the Maintenance information screen>
1
Switch to the Maintenance information screen.
1. While referring to "4-7. Maintenance information list", switch from the special menu to the Maintenance information
screen.
2. In the Maintenance information screen, select "Write all data" (item "1").
(Refer to "4-7. Maintenance information list".)
2
3
Exit maintenance information list mode.
4
You can return to the special menu by pressing the back key
<To exit from the special menu>
・ At the special menu screen, press the home key
73
Press the OK key
・ The buzzer will sound and the sewing program data,
When the screen display returns to the status before
writing started, writing of the sewing machine data is
complete.
・ If you would like to use any other read/write modes,
to close the special menu and switch to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
cycle program data, memory switch settings and
additional pattern data will be copied to the USB
memory.
press the
or
key to select the mode and then
run it.
.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents