Brother KE-430HX Service Manual page 28

4. FUNCTION SETTINGS
No. Setting range
430H: -80 − 80
(degrees)
263
438H: -100 − 100
(degrees)
430H: -80 − 80
(degrees)
264
438H: -100 − 100
(degrees)
430H: -80 − 80
(degrees)
265
438H: -100 − 100
(degrees)
430H: -80 − 80
(degrees)
266
438H: -100 − 100
(degrees)
*1: This is not initialized during initialization mode.
*2: The initial value will vary depending on the specifications. (Refer to "Initial values for each specification" on the following
page.)
17
Setting
Initial value
units
*2 1
*2 1
*2 1
*2 1
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Setting details
Changes the feed timing for the 3rd stitch at the sewing start
−: Feed timing becomes earlier.
+: Feed timing becomes later.
Changes the feed timing for the 3rd stitch before the sewing
end
−: Feed timing becomes earlier.
+: Feed timing becomes later.
Changes the feed timing for the 2nd stitch before the sewing
end
−: Feed timing becomes earlier.
+: Feed timing becomes later.
Changes the feed timing for the 1st stitch before the sewing
end
−: Feed timing becomes earlier.
+: Feed timing becomes later.