Writing Error Log Data And Memory Switch Data To Usb Memory - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

5-18-11. Writing error log data and memory switch data to USB memory

Error logs are handled as maintenance information, and so they can only be written to the USB memory from the
Maintenance information screen.
1
Switch to the Maintenance information screen.
1. While referring to "4-7. Maintenance information list", switch from the special menu to the Maintenance information
screen.
2. In the Maintenance information screen, select "Export maintenance information" (item "2").
(Refer to "4-7. Maintenance information list".)
2
3
Exit maintenance information list mode.
4
You can return to the special menu by pressing the back key
<To exit from the special menu>
・ At the special menu screen, press the home key
Press the OK key
・ The buzzer will sound and the error log data and
When the screen display returns to the status before
writing started, writing of the log data is complete.
・ If you would like to use any other read/write modes,
to close the special menu and switch to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
memory switch log data will be copied to the USB
memory.
press the
or
key to select the mode and then
run it.
.
5. SETTING FUNCTION
80

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents