Setting Method For Standard Depression Strokes (Foot Switch) - Brother KE-430HX Service Manual

9-22. Setting method for standard depression strokes (Foot switch)

Use the following procedure to set the operating positions for the depression stroke.
1 The display will switch to the pedal adjustment screen.
While pressing the menu key, turn on the power switch.
・ The panel display will switch to the adjustment menu screen.
The display will switch to the pedal adjustment screen.
2
・Touch "Pedal adjustment" in the adjustment menu screen to switch to the pedal adjustment screen.
3 Memorizing the maximum forward position
With the foot switch depressed all the way forward, wait until the voltage display value stabilizes and then press the OK
key .
4 Memorizing the neutral position
With your foot released from the foot switch, wait until the voltage display value stabilizes and then press the OK key
.
5 Memorizing the maximum backward position
With the foot switch depressed all the way backward, wait until the voltage display value stabilizes and then press the
OK key .
6 Completion of setting
When the setting is complete, the display will return to the
adjustment menu screen.
NOTE:
If the foot switch operation is not carried out correctly, the
screen shown in the illustration at left will be displayed
and the buzzer will sound twice. Repeat the procedure
from recording the maximum pedal depression amount in
step 3.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
9. ADJUSTMENT
2827B
2828B
154