Changing Lubricating Oil (When The Oil Change Warning Is Displayed) - Brother KE-430HX Service Manual

10. MAINTENANCE

10-2. Changing lubricating oil (When the oil change warning is displayed)

If the oil change warning is displayed when the power switch is turned on, it is to notify you that it is time to change the oil.
(The sewing machine will not operate at this time, even if the foot switch is depressed.)
Change oil as required, while referring to the following for details.
< To continue sewing temporarily without changing oil >
NOTE:
• The oil change warning will continue to be displayed each time the power is turned on until the oil is changed and the
notification is reset by carrying out the procedure on page 164.
• If you continue to use the sewing machine after the oil change warning appears without changing the oil (or without
carrying out the reset procedure), "E100" will appear after a certain period of time and the sewing machine will be forcibly
prevented from operating for safety reasons.
If this happens, change the oil and then carry out the reset procedure.
161
1. Press the reset key
2. After you return to the home screen, you can depress the
foot switch to resume sewing.
* If you continue to use the sewing machine after carrying
out the reset procedure but without changing the oil,
problems with the sewing machine may result.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.