Brother KE-430HX Service Manual page 72

5. SETTING FUNCTION
5
Select a program.
6
Repeat steps 3 to 5 above to register step 2 and subsequent steps in the same way.
・ If you would like to insert a new step in between
two existing steps
End cycle program setting mode.
7
8
If you would like to continue setting another cycle program, repeat steps 2 to 7 above.
9
<To exit from the cycle program setting screen>
・ At the delete user program screen, you can press the back key
setting menu.
・ In addition, when the home key
61
Touch the user program which has been registered as a
step to select it from the list.
・ The display will switch to the cycle program edit
If two or more steps are registered and you would like to
insert a new step in between two already-registered
steps, add check marks to the two existing steps to select
them, and then touch the step select key
・ The selected user program will be registered in
Touch the OK key
・ The display will return to the select cycle program
This completes the registering of cycle programs.
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
screen and the selected program will be registered in
the selected step.
between the two selected steps at this time.
.
screen.
or the menu key
.
to return to the