Assembly; Led Mechanism - Brother KE-430HX Service Manual

8. ASSEMBLY

8. ASSEMBLY
Disassembly should only be carried out by a qualified
technician.
Turn off the power switch before carrying out
disassembly, otherwise the machine may operate if
the foot switch is depressed by mistake, which may
result in injury.
Be sure to wear protective goggles and gloves when
handling the lubricating oil and grease, so that they
do not get into your eyes or onto your skin, otherwise
inflammation can result.
Furthermore, do not drink the oil or eat the grease
under any circumstances, as they can cause
vomiting and diarrhea.
Keep the oil out of the reach of children.
Assemble each part in order of the numbers.
* (number) indicates part names only. (The numbers do not indicate the order of assembly.)
* Apply grease to the required places when reassembling the parts and once every two years.
Unless otherwise specified, use Brother-specified "Grease unit (other than for Europe: SA8771-101,
for Europe: SB6659-101)".

8-1. LED mechanism

1. LED assembly
2. LED setting plate
3. Bolt
105
CAUTION
KE-430HX/KE-430HS, BE-438HX/BE-438HS
When replacing parts
accessories, be sure to use only genuine Brother
parts.
Brother will not be held responsible for any
accidents or problems resulting from the use of
non-genuine parts.
If any safety devices have been removed, be
absolutely sure to re-install them to their original
positions and check that they operate correctly
.
before using the machine
To prevent accidents and problems, do not modify
the machine yourself.
Brother will not be held responsible for any accidents
or problems resulting from modifications made to the
machine.
Install so that the boss part of LED
assembly 1 goes into the hole of the
arm.
and installing optional
4014B