Writing Program Data To An Usb Memory - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-18-8. Writing program data to an USB memory

1
2
3
Exit read/write mode
4
・ At the Read/Write data screen, you can press the back key
setting menu.
・ In addition, when the home key
77
Select item No. "6" in the Read/Write data screen.
(Refer to "5-18-2. Preparation for reading/writing data".)
Press the OK key
・ The buzzer will sound, and the sewing program data and
cycle program data will be copied to the USB memory.
When the screen display returns to the status before writing
started, writing of the program data is complete.
・ If you would like to use any other read/write modes, press
the
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
or key to select the mode and then run it.
or the menu key to return to the