Set the feed in the Y direction
6
For example, set to -3.00.
7
Confirm the feed amount and exit the parallel
movement settings.
NOTE:
・ If you change the program number, the X-scale or the Y-scale, the movement amount which has been stored will be
reset.
When the power switch is turned off, the movement amount which has been stored will be reset. However, if memory
switch No. 465 is set to "2", the movement amount will remain stored and will not be reset.
Each time the
clamp/button clamp will move by 0.05 mm.
*
*
Touch the OK key
・ The parallel movement amounts in the X direction and
・ If you touch the back key
KE-430HX/KE-430HS, BE-438HX/BE-438HS
or
In Y-scale parallel movement mode, the work
clamp/button clamp will move forward when the
key is pressed, and backward when the
key is pressed.
If the sewing pattern goes outside the sewing area as
a result of parallel movement, sewing will not be
possible.
.
Y direction will be confirmed, and the display will
return to the setting menu screen.
or the home key
OK key, you can cancel the changes without saving
them.
5. SETTING FUNCTION
key is pressed, the work
, the menu key
without touching the
48