Brother KE-430HX Service Manual page 162

9. ADJUSTMENT
5
For example, if the offset value is -2
6
(2)
7 Repeat steps 5 and 6 to set the home position to the correct position.
Completion of setting
8
9 Turn off the power switch.
151
Press the
wiper driving lever (3) is at the position where it starts
moving to set the offset value.
・ The work clamp motor will operate in accordance with
・ The offset value will flash after it has been changed.
4009B
4009B
(4)
Touch the check key
the offset value.
・ Home position detection for the work clamp motor will
Touch the OK key
・ The changed offset value will stop flashing and will be
* If the offset value has not been provisionally confirmed
When the setting has been completed, press the back key
・ The display will return to the adjustment menu screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
key or the
the offset value.
be carried out based on the currently-displayed offset
value. Check the home position.
to confirm the offset value.
illuminated on the screen.
(if the check key was not touched), the invalid buzzer
will sound.
.
key (4) until the thread
(2) to provisionally confirm