Thread Wiper Mechanism - Brother KE-430HX Service Manual

8-4. Thread wiper mechanism

Apply grease to the portions indicated by the white arrows.
Tighten the set screw 5 while gently
pushing the wiper shaft 2 toward the
direction for installation in the arm.
1. Thread wiper rod assembly [Insert from the front]
2. Wiper shaft
3. Plain washer
4. Retaining ring E
5. Set screw [Tighten]
Small amount
6. O rings [2 pcs]
7. Connecting plate
8. Plain washer
9. Retaining ring E
10. Thread wiper arm assembly
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Adjust while referring
Adjusting the thread wiper"
11. Plain washers [2 pcs]
12. Screws [2 pcs]
13. Retaining ring E
14. Set screw [Tighten]
8. ASSEMBLY
to "9-13.
.
4017B
108