Using The Garment Counter - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-14. Using the garment counter

<Setting the counter value>
Switch to garment counter setting mode.
1
2
Change the counter value.
(3)
3
Apply the changed parameter setting.
<Garment counter operation>
The garment counter always operates when sewing cycle programs.
・ If you would like to display the garment counter on the home screen, set memory switch No. 300 to "ON".
・ The garment counter will not be displayed on the home screen when sewing programs other than cycle programs.
・ The counter value which is displayed on the home screen will be incremented by 1 each time all of the steps in the
selected cycle program have been sewn once.
65
(1)
(4)
(2)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
From the setting menu screen
Touch the menu key to switch to the setting menu screen,
and touch "Garment counter setting" in the menu.
From the home screen
When a cycle program is selected or if memory switch
No. 300 is set to "ON", you can also touch the garment
counter icon (1) at the home screen to switch
the screen.
・ The 5 digits of current counter value will be displayed.
Touch the key or the
counter value (3).
・ The counter value can be set from "00000" to
"09999".
・ If you press the reset key
mode, the value will become "00000".
Touch the OK key
・ The value will be applied and the display will return to
the setting menu screen (*1).
・ If you touch the back key
the OK key, you can cancel the changes.
*1: If you have switched from the home screen, the
display will return to the home screen.
key (2) to change the
(4) during setting
.
without touching