Brother KE-430HX Service Manual page 67

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

Select an item to be changed.
4
①X scale, ②Y scale, ③Sewing speed, ④Work clamp height
5
Change the setting for the parameter.
(Refer to "List of items" on the next page for details
on parameter changes.)
Example: X scale setting
(3)
6
Apply the changed parameter setting.
7
Repeat steps 4 to 6 to register the settings for each item.
8
Register the settings for the user program.
9
If you would like to continue another program, repeat steps 2 to 8 above.
(4)
(2)
(5)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Touch the item to be changed.
Touch the
or
keypad keys (3) to change the parameter setting.
・ You can make the initial setting appear in the display
by pressing the reset key
Touch the OK key
・ The display will return to the user program editing
screen, and the edited parameters will be applied.
・ If you press the back key
the OK key, you can cancel the parameter changes.
Once all the items have been set, touch the OK key
in the user program editing screen.
・ The display will return to the select user program
screen, and the program which was set will be
registered.
・ If you press the back key
the OK key, you can return to the select user program
screen and cancel the changes to parameter settings.
5. SETTING FUNCTION
key (2), or touch the numeric
(4).
.
(5) without pressing
without pressing
56

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents