Program Setting Method - Brother BAS-311H Basic Operation Manual

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-2. Program setting method

For details on the sewing data reading method, refer to "6. USING SD CARDS".
Select the item to be changed.
1
X-scale
2 Change the setting for the parameter.
(Refer to "5-2-1. Parameter list" on the next page
for details on parameter changes.）
3 Repeat steps 1 to 2 above to record the settings for each parameter.
* When memory switch No. 400 is set to ON, the horizontal scale, vertical scale, sewing speed and work clamp height can be
recorded separately for each program number.
* When memory switch No. 100 is set to ON, slow start patterns can be recorded separately for each program number.
* For details on memory switches, refer to "6-1. Setting memory switches" in the instruction manual CD.
30
Y-scale Sewing speed
Press the SELECT key.
・ The selected parameter changes in the order shown in
the illustration below each time the SELECT key is
2401B
pressed.
Slow start pattern Counter
Press the or
3072B
BAS-311H
Split No. Thread wiping
key to change the parameter setting.