9. ADJUSTMENT
9-23. Data initialization method
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the
memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by
following the steps given below to initialize the memory setting data.
1
Switch to initialization mode.
(While pressing the menu key, turn on the power
switch.)
2
155
[Reference]
If the
or
key is touched at this time, you can select the items to be initialized as
shown below.
* For details on initialization items other than "All clear", refer to the Service Manual.
Items displayed on the screen
All clear
Standard program initialization
Additional program
initialization
User program initialization
こめ
Cycle program initialization
Memory switch initialization
KE-430HX/KE-430HS, BE-438HX/BE-438HS
The adjustment menu screen will be displayed.
Touch "Initialization" in the adjustment menu to switch to the
initialization screen.
If you touch an item name in the list, the initialization check
screen will be displayed.
・Touch the OK key
・When the screen display returns to the initialization screen,
initialization is complete.
Initialization items
All data in memory is cleared or
initialized.
The sewing condition settings
are initialized.
All additional program settings
are initialized.
All user program settings are
initialized.
All cycle program settings are
initialized.
All memory switches which can
be initialized are initialized.
to start the initialization.