Work Flowchart - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-1-1. Work flowchart

YES
Close the pattern
editing screen.
End
41
Start
Set memory switch No.
469 to ON.
Have
any additional
programs (A001 to A500)
been registered?
YES
Switch to the
pattern editing
screen.
Is editing complete?
NO
Are the
edited contents
to be ...
Added?
Changed?
Deleted?
KE-430HX/KE-430HS, BE-438HX/BE-438HS
NO
Copy the standard sewing program that you
would like to edit and create an additional
program from it. Or, read data from external
media and register it as an additional program.
Refer to "5-16. Copying programs (Additional
program)" and "5-18-5. Reading additional
pattern data".
* Pattern editing is not possible for programs
other than additional programs.
Add a section at the position where it is to be
added.
Refer to "5-1-3. Checking pattern data" and
"5-1-5. Adding sections".
Add a tension code at the point to be changed.
Refer to "5-1-3. Checking pattern data" and
"5-1-6. Changing tension codes within a
section".
Select the section to be deleted and then delete
it. Refer to "5-1-3. Checking pattern data" and
"5-1-7. Deleting sections".