Reading Program Data - Brother KE-430HX Service Manual

5-18-7. Reading program data

1
2
3
Exit read/write mode
4
・ At the Read/Write data screen, you can press the back key
setting menu.
・ In addition, when the home key
Select item No. "5" in the Read/Write data screen.
(Refer to "5-18-2. Preparation for reading/writing data".)
Press the OK key
・ The buzzer will sound and the sewing program data and
cycle program data will be read from the USB memory and
stored in the sewing machine's memory, and the sewing
programs and cycle programs will then be set.
・ If no sewing program data or cycle program data exists, an
error buzzer will sound.
When the screen display returns to the status before reading
started, reading of the program data is complete.
・ If you would like to use any other read/write modes, press
the
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
or key to select the mode and then run it.
or the menu key
5. SETTING FUNCTION
to return to the
76