Cycle Program Setting - Brother RH-981A Instruction Manual

Chapter 7 OTHER FUNCTIONS

Cycle Program Setting

Cycle program setting
Setting can be performed as for continuous execution of 8 programs at maximum.
The example below exemplifies changing the cycle program from [01 (ON), 01 (ON), 05 (OFF)] to [01
(ON), 01 (ON), 01 (ON), 05 (OFF)].
1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Cycle program> icon with the [
4. Select the required cycle program with the [
5. Select any one of the program No. (01 - 09) with the [+/-] key.
6. Select [05] with the [
below from [0FF] to [ON] with the same operation.
7. Select [-] below [C4] with the [
setting below from [ON] to [OFF] with the same operation.
If the knife setting is kept to be ON and no setting is performed for the knife at the machine, the knife
performs operation in sewing on the settings set at the programmer although settings at the machine
are prior to those at the programmer.
E-40
W0012Q
] key and press the [ENTER] key.
W0017Q
] key and press the [ENTER] key.
W0114Q
W0069Q
] key and change to [01] with the [+/-] key. Change the knife setting
W0069Q
] key and change to [05] with the [+/-] key. Change the knife
W0070Q
PD-9810
W0070Q
W0071Q