Program Sewing (Patterns 5 To 9) Setting Procedure - Brother S-7000DD Service Manual

2-2-8. Program sewing (patterns 5 to 9) setting procedure

[Example: If creating a program with the following nine steps in pattern 5]
2
1
3
4
5
Select pattern 5
1
Set the start backtack stitches in step 1
2
Switch to number of step stitches display (Step 1)
3
Set step 1
4
STEP 1 Start backtack stitches A = 4, B = 4, No. of step stitches = 5, AUTO
8
STEP 2 No. of step stitches = 10, AUTO
9
STEP 3 No. of step stitches = 40, AUTO
STEP 4 No. of step stitches = 20, AUTO
7
STEP 5 No. of step stitches = 30, AUTO
STEP 6 No. of step stitches = 20, AUTO
STEP 7 No. of step stitches = 40, AUTO
STEP 8 No. of step stitches = 10, AUTO
6
STEP 9 No. of step stitches = 5, End backtack stitches C = 4, D = 4, AUTO,
• Press the D
• Press the
illuminates)
2. FUNCTION SETTINGS (OPERATION PANEL)
Automatic thread trimming
Press the A key to select pattern 5.
• Press the A
stitches A to 4.
• Press the B
stitches B to 4.
• Press the FUNC key to switch to the number of
step stitches display.
Flashing
key to set the number of stitches D to 5.
key to set the AUTO function to enabled. (Indicator
S-7000DD
key to set the number of
key to set the number of
(Continued on next page)
24