Adjusting The Position Of The Movable Knife - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

9-7. Adjusting the position of the movable knife

4060B
1. Remove the rear cover.
2. Tilt back the machine head.
3. Remove the motor bracket rear cover (1).
4. Turn the thread trimmer cam (2) by hand so that the movable knife pin (3) lowers to its lowest position.
5. Loosen the bolt (4).
6. Move the thread trimmer link (5) back and forth by turning the thread trimmer cam (2) by hand to adjust so that the ridge line
on the movable knife (6) is touching the edge of the index mark (7), and then tighten the bolt (4) while keeping the parts in
this position.
7. Install the motor bracket rear cover (1).
8. Return the machine head to its original position, and then install the rear cover.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
9. ADJUSTMENT
4061B
138

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents