Deleting Cycle Programs - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

5-11. Deleting cycle programs

Cycle programs which are not needed can be deleted.
1
Switch to the delete cycle program setting screen.
2
Select the program number for the program that you
would like to delete.
Example: program number C001
(1)
Delete the cycle programs.
3
4
<To exit from the cycle program deleting screen>
・ At the delete cycle program screen, you can press the back key
setting menu.
・ In addition, when the home key
Press the menu key to switch to the setting menu screen.
Touch "Delete cycle program" in the setting menu screen
to switch to the select delete cycle program screen.
・ If any cycle programs have been registered, they will
Set the program number (1) for the cycle program which
you would like to delete from the list on the screen.
・ Select the number by which the program has been
・ When you touch a program number, a check mark
・ You can select all cycle programs in the list (C001 to
(2)
Once all the cycle programs to be deleted have been
selected, you can press the delete key
delete the cycle programs which are currently selected.
(3)
・ "---" will be displayed after the program numbers of
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
be displayed in the list in the format of "Program
No." (Step: "Cycle program step number"; if no cycle
programs have been registered, "---" will be displayed
after the program numbers.
registered.
will appear against the program number in the
list. (Multiple program numbers can be selected.)
C030) by pressing the ALL key
the cycle programs which have been deleted.
or the menu key
5. SETTING FUNCTION
(2).
(3) to
to return to the
62

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents