E series industrial electronic lockstitch button sewer/electronic lockstitch bar tacker (107 pages)
Summary of Contents for Brother KE-430F
Stable thread tightening and thread trimmer when sewing from foundation to denim. High quality sewing will be realized at various materials. KE-430F gains high productivity as it’s the world’s fastest cycle time. Beautiful sewing and easy to adjust sewing functions...
Overwhelmingly Superior Productivity with the World's Fastest Cycle Time Since a direct drive system is used, KE-430F boasts the world s fastest sewing speed of 3,200 sti/min in shuttle rotation hook sewing machines. Since the work clamp lift amount can be set in two steps, it contributes to productivity enhancement.
Environment-conscious Brother has established its original "Brother Green Label" for the products, in conformity with ISO 14021 and JIS Q14021. The KE-430F and BE-438F are certified as environment-conscious sewing machines according to the "Brother Green Label" standard.
KE-430F BE-438F Electronic direct drive Electronic direct drive lockstitch bar tacker lockstitch button sewer The sewing patterns shown below have been preset into the sewing machine and can be selected according to specifications.(Any sewing pattern is available as long as it is within the work clamp and feed plate in size.) Use the work clamp and feed plate that match the respective sewing pattern selected.
Vertical bar tacking Vertical straight bar tacking Sewing No. of Sewing No. of Sewing No. of Sewing No. of Length Width Length Width Length Width Length Width stitches stitches stitches stitches (mm) (mm) (mm) (mm) pattern pattern pattern pattern 3 10 3 16 0.3 10 0.3 20...
Pe riphe ra l equipment and Opt ion Sewing data programming software Double-pedal foot switch The right and left pedals are provided for With the KE-430F, sewing can be separated operation done using sewing patterns other functions. This allows than preset ones. PS-300B is...
The sewing patterns shown below have been preset into the sewing machine. Any sewing pattern can be selected as long as the needle will drop down into the holes of the buttons. When sewing patterns that do not have crossover stitches, the thread is trimmed after sewing of one side is completed, and then the other side is sewn.
*3 The number of sewing patterns and the number of stitches that can be recorded will vary depending on the number of stitches in each sewing pattern. RoHS Compliant KE-430F/BE-438F are compliant with the RoHS Directive (the restriction of the use of certain hazardous substances in electrical and electronic equipment) Product specifications are subject to change for improvement without notice.