Brother KE-430HX Service Manual page 134

8. ASSEMBLY
Pour in oil while referring to "10-2.
Changing lubricating oil (When the oil
change warning is displayed)".
Apply sealant (Loctite 207 white or similar)
to the groove in the bed bottom cover 37,
insert the bottom cover packing 36, and
then tighten the ten screws 38 in diagonal
order to a tightening torque of 2.5 N.m.
31. Bolts [2 pcs]
32. Splash plate
33. Socket bolts (S/P washer) [2 pcs]
34. Lower shaft felt assembly
35. Screws [2 pcs]
36. Bottom cover packing
123
37. Bed bottom cover
38. Screws [10 pcs]
39. O ring
40. Screw
41. Rubber caps [2 pcs]
KE-430HX/KE-430HS, BE-438HX/BE-438HS
4038B