Illumination Led Brightness Setting Method; Setting Additional Programs - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-5. Illumination LED brightness setting method

1 Switch to the illumination LED brightness setting
screen.
2

5-6. Setting additional programs

Sewing data which has been created externally can be loaded from USB memory and registered as additional programs. In
addition, standard programs can also be registered as additional programs using the program copy function.
With additional programs, you can edit the tension codes (adding, changing and deleting), and also register them as user
programs.
* For details on loading additional programs from USB memory, refer to "5-18-5. Reading additional pattern data".
* For details on the program copying method, refer to "5-16. Copying programs (additional programs)".
* For details on editing tension codes, refer to "5-1. Editing patterns".
53
(1)
(1)
(2)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Touch the menu key to switch to the setting menu screen.
Touch "Illumination LED brightness setting" in the menu
to switch to the illumination LED brightness setting
screen.
You can touch the
illumination LED brightness (2).
When the setting is complete, touch the OK key
on the screen.
・ When you touch the OK key to switch to the setting
menu screen, the LED will illuminate at the set
brightness.
・ If you would like to cancel the setting, press the back
key , the menu key
to switch the screen without applying the
changes.
・ The brightness level can be set to a value from "0" to
"9".
・ If the brightness level is set to "0", the LED will switch
off, and if it is set to a number from 1 to 9, the LED
brightness will be greater if a larger number is
selected as the setting.
or key (1) to change the
or the home key