Reading All Data - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

5. SETTING FUNCTION

5-18-3. Reading all data

1
2
3
Exit read/write mode
4
・ At the Read/Write data screen, you can press the back key
setting menu.
・ In addition, when the home key
71
Select item No. "1" in the Read/Write data screen.
(Refer to "5-18-2. Preparation for reading/writing data".)
Press the OK key
・ The buzzer will sound and the sewing program data, cycle
program data, memory switch settings and additional
pattern data will be read from the USB memory and stored
in the sewing machine's memory.
・ If any one of additional program data, memory switch data,
sewing pattern data or cycle program data does not exist in
the USB memory, an error buzzer will sound.
When the display returns to the status in step 1, writing of the
sewing machine data is complete.
・ If you would like to use any other read/write modes, press
the
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
or
key to select the mode and then run it.
or the menu key
to return to the

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents