Brother KE-430HX Service Manual page 50

4. FUNCTION SETTINGS
When updating the motor control program version
<Preparation for updating the program version>
1
1. The motor control program (ISM22MT.BVP) can be found in the following folder in the USB memory.
\BROTHER\ISM\ISMSYS\
2. Connect the USB memory to the USB port.
2 <Starting software version update mode>
3 <Version update selection mode>
<While version updates are running>
4
39
1. While pressing the TEST key, turn on the power to switch to the version
update selection screen.
1. Check that the version number (1) for the motor control program that you are
going to update is correct.
2. Touch the motor control program item (1) in the list, and then touch the OK
key
(1)
1. While version updating is in progress, the progress status will be displayed.
* Do not turn off the power while version updating is in progress.
2. Once version updating is finished, turn off the power.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
to start the version update.