Brother KE-430HX Service Manual page 27

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

Feed settings (200 − 299)
No.
Setting range
200
ON/OFF
250
ON/OFF
251
1 − 5
252
ON/OFF
253
0 − 2
*1
430H: -80 − 80
(degrees)
260
438H: -100 − 100
(degrees)
430H: -80 − 80
(degrees)
261
438H: -100 − 100
(degrees)
430H: -80 − 80
(degrees)
262
438H: -100 − 100
(degrees)
Setting
Initial value
units
430H: OFF
-
438H: ON
OFF
-
3
1
OFF
-
0
1
*2
1
*2
1
*2
1
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Setting details
Single stitch test feed method
ON: During test feeding, the mechanism moves one stitch at
a time when the foot switch is depressed to the 2nd
step (for a 2-pedal foot switch, when the start switch is
depressed).
In addition, during test mode, test feeding will move
forward one stitch at a time when the machine pulley is
turned by hand.
OFF: During test feeding, sewing starts and automatically
continues to the last stitch when the foot switch is
depressed to the 2nd step (for a 2-pedal foot switch,
when the start switch is depressed).
Home position detection at the sewing end
ON: At the sewing end, the work clamp/button clamp will
detect the home position and then move to the sewing
start position.
OFF: At the sewing end, the work clamp/button clamp will
move to the sewing start position.
Feeding speed
1: 100 mm/s (Slow)
2: 200 mm/s
3: 300 mm/s
4: 400 mm/s
5: 500 mm/s (Fast)
High-speed test feed method
* Enabled when No. 200 is set to "OFF".
ON: High-speed feeding starts at the same time test feeding
starts.
OFF: Normally slow, but becomes faster when the foot
switch is depressed to the 1st step (for a 2-pedal foot
switch, when the work clamp switch is depressed).
Moving method to the sewing start position
0: Depress the foot switch to the 2nd step (for a 2-pedal foot
switch, depress the start switch) while the program
number is flashing.
1: Press the Pause key while the program number is
flashing.
2: Press the special external input switch (option input (IN3))
while the program number is flashing.
Changes the overall feed timing
−: Feed timing becomes earlier.
+: Feed timing becomes later.
Changes the feed timing for the 1st stitch at the sewing start
−: Feed timing becomes earlier.
+: Feed timing becomes later.
Changes the feed timing for the 2nd stitch at the sewing start
−: Feed timing becomes earlier.
+: Feed timing becomes later.
4. FUNCTION SETTINGS
16

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents