Setting Function; Edit Pattern - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

5. SETTING FUNCTION

5-1. Edit pattern

Tension codes are recorded in the pattern data to provide tension information.
The tension codes indicate the type of tension.
In addition, the units which tension codes are divided into are called sections, and sequential numbers are assigned to them
starting from the first stitch. Up to a maximum of 99 sections are possible.
* The tension values for the sections are set in program mode for each program.
Example: Additional program No. A002 (stitch count 30)
1st stitch
2nd stitch
Section <1>
Needle Drop No. <1>
Upper thread tension <75>
Example: Operation when pattern editing for additional program No. A002 has been set as follows for sewing
Tension code diagram
Vertical axis: Tension value
Horizontal axis: Number of
stitches
10th stitch
Section <2>
Needle Drop No. <2>
Upper thread tension <180>
Example: Pattern editing settings
Needle Drop No.
1st stitch
2nd stitch (to 9th stitch)
10th stitch (to 27th stitch)
28th stitch (to final stitch)
Section
No.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Section <3>
Needle Drop No. <10>
Upper thread tension <120>
Pattern No. 200
Section No.
1
2
3
4
5. SETTING FUNCTION
28th stitch
Section <4>
Needle Drop No. <28>
Upper thread tension <75>
Tension value
75
180
120
75
Final stitch
Final stitch
2623B
40

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents