Adjusting The Shuttle Race Thread Guide; Hook Lubrication Amount - Brother KE-430HX Service Manual

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

9. ADJUSTMENT

9-5. Adjusting the shuttle race thread guide

Install the shuttle race thread guide (1) by pushing it in the direction of the arrow so that the needle groove is aligned with the
center of the needle plate hole.
NOTE:
If the shuttle race thread guide is in the wrong position, thread breakages, soiled thread or thread entanglements may occur.
The position of the shuttle race thread guide is adjusted at the time of shipment from the factory. It should not be changed if
at all possible.

9-6. Hook lubrication amount

KE-430HX/HS (-05 specifications)
More
oil
1. Tilt back the machine head.
2. Loosen the two bolts (1), and then adjust by moving the oil tank assembly (2) up or down.
KE-430HX/HS (-05 specifications)
The standard position is when the centers of the two bolts (1) are aligned with the reference line on the oil tank plate (3).
KE-430HX/HS (-03, -0K, -01 specifications), BE-438HX/HS
The standard position is when the oil tank assembly (2) is as far forward as possible as shown in the illustration.
137
Less
oil
KE-430HX/KE-430HS, BE-438HX/BE-438HS
KE-430HX/HS (-03, -0K, -01 specifications), BE-438HX/HS
More
oil
Less
oil
2329B
4059B

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents