Brother KE-430HX Service Manual page 49

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

When updating the panel control program version
<Preparation for updating the program version>
1
1. The panel control program (ISM22PL.upf) can be found in the following folder in the USB memory.
\BROTHER\ISM\ISMSYS\
2. Connect the USB memory to the USB port.
2
<Starting software version update mode>
3
<Version update selection mode>
<While version updates are running>
4
1. While pressing the TEST key, turn on the power to switch to the version
update selection screen.
1. Check that the version number (1) for the panel control program that you are
going to update is correct.
2. Touch the panel control program item (1) in the list, and then touch the OK
key
(1)
1. While version updating is in progress, the progress status will be displayed.
* Do not turn off the power while version updating is in progress.
2. Once version updating is finished, turn off the power.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
to start the version update.
4. FUNCTION SETTINGS
38

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents