Brother KE-430HX Service Manual page 218

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

14. ELECTRIC MECHANISM
Error status #14 The feed mechanism does not slowly move stitch by stitch during test feeding.
Probable causes
1. Incorrect memory switch setting
2. Malfunction of foot switch and cord
Error status #15 Quick feeding cannot be performed during test feeding.
Probable causes
Malfunction of foot switch and cord
Error status #16 The machine does not operate correctly for the set program during test feeding.
Probable causes
Malfunction of foot switch and cord
Error status #17 The machine does not operate during sewing, and the error code [E130], [E131] or [E132] appears on the display.
Probable causes
Malfunction of machine motor, fuses
or power supply motor PCB.
207
Check/ repair/ adjust
Set memory switch No. 200 to OFF.
(The default setting is ON for the BE-438H.)
See #5.
Check/ repair/ adjust
See #5.
Check/ repair/ adjust
See #5.
Check/ repair/ adjust
Refer to steps 1 to 4 in #6.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Parts to be replaced
Parts to be replaced
Parts to be replaced
Parts to be replaced

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents