Reading Memory Switch Data - Brother KE-430HX Service Manual

5-18-9. Reading memory switch data

1
2
3
Exit read/write mode
4
・ At the Read/Write data screen, you can press the back key
setting menu.
・ In addition, when the home key
Select item No. "7" in the Read/Write data screen.
(Refer to "5-18-2. Preparation for reading/writing data".)
Press the OK key
・ The buzzer will sound, all memory switch setting data will be
read from the USB memory and written into the sewing
machine's memory, and the memory switch settings will
then be applied.
・ If no memory switch data exists, an error will be generated.
When the screen display returns to the status before reading
started, reading of the memory switch data is complete.
・ If you would like to use any other read/write modes, press
the
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
.
or key to select the mode and then run it.
or the menu key
5. SETTING FUNCTION
to return to the
78