Switching To Pattern Editing Mode - Brother KE-430HX Service Manual

5-1-2. Switching to pattern editing mode

1
(1)
2
(2)
3
2nd step
Press the menu key
Press "Edit pattern" in the setting menu to switch to the edit
pattern screen.
・ The number of stitches until the final stitch (1), the section
number and the tension value for the current section are
displayed on the screen.
* In order to switch to the the edit pattern screen, it is
necessary to first create at least one additional program,
and to set memory switch No. 469 to "ON".
* Switching to the edit pattern screen is only possible with
the 430HX/438HX.
Touch the program No. (the pattern image can also be
touched) (2) to switch to the program selection screen, or
press the program number change key
select the additional program number to be added.
* Only the additional program numbers which are currently
registered will be displayed.
Depress the foot switch to the 2nd step.
・ Home position is detected, and then the sewing machine
moves to the sewing start position.
From this point on, the condition is referred to as pattern
editing mode.
4441Q
KE-430HX/KE-430HS, BE-438HX/BE-438HS
5. SETTING FUNCTION
to switch to the setting menu.
or to
42